Clutches - Superturbos. What are useable?

Mercedes-Benz conversations only
anton
Sisäänajossa
Sisäänajossa
Viestit: 41
Liittynyt: Ma 17.04.2006 10:39

Clutches - Superturbos. What are useable?

Viesti Kirjoittaja anton »

I have a trouble with my super turboed 603.961. Im using the manual getrag tranny, but I have big problems with slippering clutch. I have tryed a modified std flywheel with the sprinter plate and disc.
In the beginning of the summer it worked wery well, but it started to slip at the end of summer.

So now I wonder what clutch/plate you guys are using in yours super turboed 603.96x? I have plans for the "707" plate with a sinterdisc. It would hold up to 800nm.
Avatar
Forced_Induction
Vakiokalustoa
Vakiokalustoa
Viestit: 101
Liittynyt: Su 24.09.2006 06:04
Paikkakunta: Federal Heights, Colorado USA
Viesti:

Viesti Kirjoittaja Forced_Induction »

I'm interested in more info about your sprinter clutch.

How much power are you putting through it?
1982 300D
Maxed MW-Pump, Holset HE221W, straight pipe exhaust, A/W intercooler, W/M injection
W115 300D intake manifold, 2-Micron Baldwin BF7591-D fuel filter, W126 Gen-II front brakes
Webasto TSL-17 auxiliary hear, Battery relocated to the trunk, Factory skidplate, 15mm rear sway-bar
147HP, 220lb-ft at the rear wheels

2006 Honda Rebel Turbo Diesel
Kubota OC95, VZ21 turbocharger, Intercooler, Comet 40C/44D CVT
Avatar
winmutt-
Sisäänajossa
Sisäänajossa
Viestit: 22
Liittynyt: Ke 28.03.2007 17:18

Viesti Kirjoittaja winmutt- »

RatMan kirjoitti:I'm interested in more info about your sprinter clutch.

How much power are you putting through it?
We are both looking for clutch solutions for the om617 if anyone has input.
Avatar
Forced_Induction
Vakiokalustoa
Vakiokalustoa
Viestit: 101
Liittynyt: Su 24.09.2006 06:04
Paikkakunta: Federal Heights, Colorado USA
Viesti:

Viesti Kirjoittaja Forced_Induction »

We really would like to know what clutch options are available.
1982 300D
Maxed MW-Pump, Holset HE221W, straight pipe exhaust, A/W intercooler, W/M injection
W115 300D intake manifold, 2-Micron Baldwin BF7591-D fuel filter, W126 Gen-II front brakes
Webasto TSL-17 auxiliary hear, Battery relocated to the trunk, Factory skidplate, 15mm rear sway-bar
147HP, 220lb-ft at the rear wheels

2006 Honda Rebel Turbo Diesel
Kubota OC95, VZ21 turbocharger, Intercooler, Comet 40C/44D CVT
kevtan
Sisäänajossa
Sisäänajossa
Viestit: 20
Liittynyt: Ti 15.11.2011 04:31
Paikkakunta: Rawang, Malaysia

Re: Clutches - Superturbos. What are useable?

Viesti Kirjoittaja kevtan »

I'd like to know what clutch and cover to use on a w211 e220cdi 646 engine with 6 speed manual. Would very much appreciate the help.
Vastaa Viestiin