Sivu 1/1
Pump Adjustment - Translation
Lähetetty: Ma 10.10.2005 15:48
Kirjoittaja black280ce
Would someone be able to translate the phrases on this picture?
Thanks
![Kuva](http://kotisivu.mtv3.fi/mb250td/mb-dpumppu.jpg)
Lähetetty: Ma 10.10.2005 17:36
Kirjoittaja Melitos
Here goes:
On the left the pump is from w123, as it says in the picture, on the right the pump is from w124 without ELR.
First text:
Idle fine tuning
Second text
Idle coarse tuning.
-CCW decreases idle rpm.
- Should be adjusted ~same amount of degrees as full load
Third text:
Max RPM
- CW increases
Fourth text:
Full load fueling
- CCW increases
- 10% per turn
Lähetetty: Ti 11.10.2005 06:23
Kirjoittaja black280ce
Thanks
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Question
Lähetetty: Ti 17.01.2006 06:26
Kirjoittaja Brandon314159
Question for you guys,
This is the pump from a 617 Turbo Diesel
What are A, B and C and what do they do? I know the full load adjustment already.
I am looking for the "idle quantity adjustment" or similar adjustment.
Thanks!!
![Kuva](http://brandon.importtransmissionexchange.com/benz_files/IP.jpg)
Lähetetty: Ke 18.01.2006 03:33
Kirjoittaja black280ce
Thats a MW series pump right? The M/RSF governor has a similar looking screw to your "full load adjustment" but it is for "adaptation"
Lähetetty: Ke 18.01.2006 05:01
Kirjoittaja Brandon314159
I already found what I needed
Thanks for the help anyway!!
![Smile :)](./images/smilies/icon_e_smile.gif)